Closed Course Motorsport projector shrouds/reflectors/backplates are available for sale for DIY (Do It Yourself) headlight projects.
The reflectors come with a city light hole, wedge bulb pigtail, and hardware. These fit 1946-66 VW Beetle headlight assemblies. Sold per pair.
No bulbs included.
Please review the DIY on headlight assembly:
Here are a few key notes on the assembly:
This is "DIY" type project using off the shelf parts made by aftermarket suppliers. The reflectors and backplates are manufactured by CCM. The quality and fitment of the RPM and URO parts require finesse, professional installation recommended.
The RPM headlight assemblies are great for fiberglass fenders or early fenders that do not have the (4) tabs. If your fenders do have these tabs, they will need to be removed or bent to allow installation of the head light assembly.
These cars were hand built. Every car is a little different. The space between the bulb and the fender bucket is tight. Some cars there is no interference, others require massaging of the back of the bucket for additional clearance.
The VW beetle headlight adjustment screw offer very little alignment adjustment. Large alignment adjustments must be made with the assembly outside the car. Aim the projector to point down and inward, then snug up the adjustment screws to hold the alignment in place. Install on the car. Minor further adjustment can be made with the screws. Remove the lights and repeat the process until the desired alignment is achieved.
The reflectors cannot withstand the high temperatures that HID and halogen bulbs produce. LED bulbs must be used.